![]() t7: Thermostat control code STELPRO LIMITED WARRANTY.NOTE: The maximum setpoint limit must be higher than the minimum setpoint limit, and the minimum setpoint limit must be lower than the maximum setpoint limit. t2: Minimum room temperature setpoint limit (5☌ to 30☌ / 41☏ to 86☏).t1: Maximum room temperature setpoint limit (5☌ to 30☌ / 41☏ to 86☏).Press ⊡ for 3 seconds to exit the thermostat’s technical menus.Press ⊡ to confirm your selection and continue to the next menu.Press ⊡ for 10 seconds to access the thermostat’s technical menus (the advanced menu will appear after 3 seconds but continue to hold for another 7 seconds).dEF - Reset thermostat to default values: N / Y (No / Yes).30 - Keypad lock: ON / OFF (Lock keypad / Unlock keypad).By default, the ECO mode setpoint is 17 ☌ / 63 ☏. 20 - ECO mode setpoint temperature (5 ☌ to 30 ☌ / 41 ☏ to 86 ☏).10 - Temperature format: ☌ / ☏ (Celsius / Fahrenheit).Press and hold ⊡ for 3 seconds to exit the advanced menus.Press ⊡ to confirm your selection and proceed to the next menu.Press and hold ⊡ for 3 seconds to access the thermostat’s advanced menus.Press once to switch from ECO mode to COMFORT mode and vice versa.NOTE : If you change the setpoint temperature while in ECO mode, the thermostat will switch to COMFORT mode. The setpoint temperature will remain at this value until it is changed. Press once to lower or raise the setpoint temperature by 0.5 ☌ / 1 ☏.YOUR THERMOSTAT IS NOW READY TO USE! FEATURES ECO mode saves you money by providing a more energy-efficient setpoint temperature when you’re sleeping or away from home. You can switch from one mode to another by simply pressing ⊡. To meet your needs, this thermostat is equipped with two distinct modes: ECO and COMFORT. Your heating needs may vary according to the season and even the time of day. ECO mode setpoint temperature: (5 ☌ to 30 ☌ / 41 ☏ to 86 ☏).īy default, the ECO mode setpoint is 17 ☌ / 63 ☏.Temperature format: ☌ / ☏ (Celsius / Fahrenheit).Press to change your selection and ⊡ to confirm. To begin with, follow the on-screen instructions to adjust your thermostat’s settings. *Displays only when using the advanced menus. Touch the keypad once to activate the backlight, then you can make changes. The temperature setpoint remains constant unless you change it. NOTE : If you need to remove the thermostat, follow step 1 in section 1, then use a straight screwdriver to unhook it from the top of the mounting plate. Restore the power at the circuit breaker.Tighten the screw at the top of the thermostat to hold it in place securely.Rotate the thermostat upwards and attach it on the top hook of the mounting plate.Be sure not to jam the wires between the thermostat and mounting plate. Using the alignment guide, hook the bottom of the thermostat into the bottom of the plate. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |